Materials and tools needed:

8x7.5mm  Mixed Color Round Glass Beads

3x2x0.6mm  Golden Iron Cable Chains

4mm  Golden Iron Spacer Beads

5x0.7mm  Golden Iron Jump Rings

12x6mm  Golden Alloy Lobster Claw Clasps

Golden Copper Jewelry Wire

Golden 304 Stainless Steel Eye Pins

Flat nose pliers

Round nose pliers

side-cutting pliers 

Instructions on how to make the bracelet:

Step 1: Make golden beads chain

1st,thread a golden spacer beads with a golden eye pin,then cut the extra pin, and bend the wire to a loop.Repeat this step to prepare 6 such connectors;

2nd,intercept five golden cable chains with the same length, the length is according to your own wrist size;

3rd,connect the intercepted chain with the connectors just made, so that the golden beads chain is complete.

Step 2: Make winding rainbow stones

1st, snip off a proper length of golden copper wire, twist it as the patterns showing below,and cut off the extra wire;

2nd,make the same twisting after inserting a colored glass bead(as shown in the picture);

3rd,use the golden copper wire to circle the colored glass beads continuously until the rainbow stone connector as shown in the figure below is made.

4th,repeat the above steps, you need to make seven different colors of rainbow stone connectors, the colors can be selected according to your preferences.

Step 3: Finish the winding rainbow stone bracelet

1st,use golden jump rings to connect all the made rainbow stone connectors, and the rainbow stone chain is complete.

2nd,use golden jump rings to link the two ends of the golden bead chain and the rainbow stone chain together, connect the golden lobster claw clasps to one end, and connect the golden cable chain of appropriate length to the other end.

So the winding rainbow stone bracelet is done successfully, and you can match this bracelet to any of your outfits. Besides, the materials are easy to access. Don’t hesitate and make a delicate bracelet for yourself!