Materials and tools needed:

Findings

Natural Striped Agate Beads, Column, Coconut Brown, 20x8mm

White Glass Pearl Round Beads, 10mm

Natural Citrine Beads, Round, 8mm

Alloy Spacer Beads, Flower, Antique Golden

Rhinestone Cup Chains, 2mm

Copper Jewelry Wire, Light Gold, 26 Gauge

Golden Plated Brass Eye Pin, 50x0.7mm

Iron Open Jump Rings, Golden, 21 Gauge

Golden Tone Zinc Alloy Lobster Claw Clasps, 10x6mm

F6000 Excellent Viscosity Adhesive Glue

Tools

Needle Nose Pliers

Round Nose Pliers

Side Cutting Pliers

Instructions on how to make the necklace:

Step 1:

1st, String a striped agate bead and two spacer beads with an eye pin, then cut off the excess pin, and bend the wire to a loop. (as shown in the picture)

2nd, Glue a circle of rhinestone chain in the middle of the striped agate bead. (as shown in the picture)

Step 2:

1st, String a pearl with an eye pin, then cut off the excess pin away from the pearl, and bend the wire to a loop. (as shown in the picture)

2nd, Wrap the pearl with copper wire as show in the picture. Finally cut off the excess wire.

Step 3:

1st, Make multiple agate beads dangles, pearl beads dangles and citrine beads dangles.

2nd, Connect the dangles one by one in order. (as shown in the picture)

3rd, Don't forget to attach the jump ring and a lobster claw clasp at the ends.

As you can see, it is simple to make and can be finished within three steps. You can consider trying it if you want to make jewelry from simple one. I promise you could enjoy yourself a lot in the making process. Have a nice try.