Materials and tools needed:

Findings

Alloy Chandelier Components Links   

Synthetic Turquoise Beads, Mixed Shapes

4mm Round Glass Seed Beads, Crimson  

6mm Round Synthetic Turquoise Beads, Dyed Light Sea Green

6mm Round Synthetic Turquoise Beads, Dyed Gold

6mm Round Synthetic Turquoise Beads, Dyed OrangeRed

8mm White Acrylic Round Solid Beads

6mm Natural Mashan Jade Round Beads, Deep Sky Blue

6mm Natural Malaysia Jade Beads

Lead Free Oval Natural Wood Beads

Round Glass Beads, Faceted, Red

Copper Jewelry Wire

304 Stainless Steel Jump Rings

Stainless Steel Eye Pin

Zinc Alloy Lobster Claw Clasps

Tools

Flat nose pliers

Round nose pliers

side-cutting pliers

Instructions on how to make the necklace:

Step 1:

1st, Cut four pieces of copper wire of appropriate length to prepare for beading, you need to use the side-cutting pliers

2nd, First string the synthetic turquoise beads of mixed shapes, you can play your own creativity, or string according to the picture. You need to string two pieces of such bead line.

3rd, Then string 6mm sea green round synthetic turquoise beads. You also need to string two pieces of such bead line.

4th, After stringing, cut off the excess copper wire at both ends, and bend the wire to a loop. Then connect jump rings and lobster claw clasps. (as shown in the picture)

Step 2:

1st, Use jump rings to connect two chandelier components links to the end of the necklace. (as shown in the picture)

2nd, Thread two 6mm deep sky blue natural Jade round beads and a red wood bead with an eye pin,then cut off the extra wire, and bend the wire to a loop. Then make another same. Connect them and a chandelier components link to the necklace as shown in the picture.

3rd, Hang three light green Jade beads pendants and two red faceted round glass beads pendants on the chandelier components link in the middle position. (as shown in the picture)

4th, Cut a piece of copper wire for stringing 4mm crimson round glass seed beads, then cut off the excess copper wire at both ends and bend the wire to a loop after stringing. Connect this bead line to the chandelier components links. (as shown in the picture)

Step 3:

Cut four different lengths of copper wire to string four different colors of beads, light sea green, gold, orange red and white. Then connect them to the necklace as in the above steps. (as shown in the picture)

The necklace is completed! Isn’t it interesting? Come and give it a try! You can use the same method to make other bohemian style necklace! I can’t wait to share other jewelry making tutorials with you. See you next time.