Materials and tools needed:

Findings

Golden Snowflake Pattern Printed Ribbon, White, 1 inches(25mm)

Red Satin Ribbon, 1 inch(25mm)

Christmas Themed Pattern Printed Satin Ribbon, Green, 1 inch(25mm)

Printed Polyester Grosgrain Ribbon for Christmas, Mixed Color, 1 inches(25mm)

Single Face Solid Color Satin Ribbon, Red, 3/8 inch(9~10mm)

Glitter Metallic Ribbon, Gold, 3/8inch(9~10mm)

Single Face Satin Ribbon, White, 1-1/2 inch(37mm)

Brass Bell Charms

Iron Jump Rings, Mixed Size, Golden

Polyester High-elastic Pom Pom Ball, Round, Mixed Color

Tools

Stainless-Steel Scissors

Hot Melt Glue Gun

Hot Melt Plastic Glue Sticks

Lighter

Instructions on how to make the wreath:

Step 1:

1st, Take a piece of card stock and cut it into a circle of about 100mm in diameter. Then cut out a circle of about 50mm in diameter in the center of the round card stock. (as shown in the picture)

2nd, Cut a 50mm section of ribbon with gold snowflake pattern and burn off the excess thread at the cut with a lighter. Use hot melt glue to secure this ribbon into a triangle as shown. You will need to make sixteen of these ribbon triangles.

3rd, Glue the ribbon triangles to the round card stock, eight per layer. (as shown in the picture)

Step 2:

1st, Make the same triangles with 25mm red ribbon and continue to glue them to the round card stock. It takes sixteen ribbon triangles to glue a circle as well.

2nd, Continue making ribbon triangles with different ribbons, gluing them to the round card stock in layers. This process is easy, but requires a little patience.

3rd, Finally, glue a circle of 10mm gold ribbon can be.

Step 3:

1st, Take three pieces of 10mm red ribbon and three pieces of 10mm gold ribbon and fix them as shown in the picture.

2nd, Secure the three sections of red ribbon together, then secure the three sections of gold ribbon above. Finally, you can fix a metal cabochon in the middle for decoration. (as shown in the picture)

3rd, Take a 37mm wide piece of white ribbon, bend its ends toward the middle and secure it. Then fix the ribbon flower you just made on it.

Step 4:

1st, Attach the decorative accessories made in the previous step to the wreath. (as shown in the picture)

2nd, Decorate the wreath with bells and pom pom balls.

3rd, Use a piece of 10mm gold ribbon to make the hanging strap for the wreath. (as shown in the picture)

Take a look at the finished picture of this Christmas wreath. Isn't it perfect for hanging on the door or wall. I think it will surely catch the eyes of your friends and family.