Materials and tools needed:

8~9mm  Natural Cultured Freshwater Pearl Beads

6~7mm  Natural Cultured Freshwater Pearl Beads

4mm  Natural Cultured Freshwater Pearl Beads

3x2x0.6mm  Iron Cable Chains

Mixed Size  Iron Jump Rings

Mix Iron Eye Pin

Brass Ball Head pins

Tibetan Style Toggle Clasps

Flat nose pliers

Round nose pliers

side-cutting pliers 

Instructions on how to make the multilayer pearl necklace:

Step 1: Make accessories needed for the upper layer

1st,thread a 8~9mm pearl bead with a eye pin,then cut the extra pin, and bend the wire to a loop.

2nd,choose a jump ring with a suitable size and put it on the pearl bead link just completed. The effect is shown in the following step diagram.

3rd,repeat the above steps until you have completed about 20 such accessories.

Step 2: Make accessories needed for the lower layer

1st,thread three pearl beads of different sizes in turn with a ball head pin,then cut the extra pin, and bend the wire to a loop.The effect is shown in the following step diagram.You need to complete about 10 such accessories.

2nd,thread a 6~7mm pearl bead and a 4mm pearl bead with a ball head pin,then cut the extra pin, and bend the wire to a loop.The effect is shown in the following step diagram.You need to complete about 10 such accessories.

3rd,thread a 4mm pearl bead with a ball head pin,leave a bit of length and cut the extra pin, then bend the wire to a loop.The effect is shown in the following step diagram.You need to complete about 20 such accessories.

Step 3: Assembly accessories

1st,intercept two chains, the length depends on how long you suit or like.The length of the two chains is not the same.

2nd,install the prepared accessories on the two chains in turn according to the following finished picture or the style you like.

3rd,use jump rings at the ends of the two chains to connect them together, and then install the toggle clasp.

The multilayer pearl necklace is completed.Isn’t it interesting?Come and give it a try!You can buy the jewelry making supplies you need through the link below!