How to make earring hooks—useful technique for earring making

Summary: This is an easy-to-learn tutorial about how to make earring hooks; and I bet many of you would like it and think it extremely useful.

Date : Aug 22, 2012

One of the most important components in earrings is earring hook. Most jewelry makers fancy making earrings. You see, earrings are usually short, not as long as necklace or bracelet, and they only consist of earring hooks and drops. Sometimes some amounts of earrings are just loop earring hooks.

If you are one member of jewelry making club, you must have tried various patterns of earrings, among which earring hooks take a vital position. If you are a novice, earring hook is also the first thing you need to learn about.

How to make earring hooks

Here starts our project about how to make earring hooks, things you need as follows:

20 gauged wires, Round nose plier, Wrap&tap Plier, Side cutter

How to make earring hooks Step 1: make outer loop

first use side cutter to cut two pieces of wire prepared before;

Second wrap one end of one piece of wire around the jaw, and make a loop with the nose round plier;

Third never close the loop, leaving a tiny space between the wire end and loop end, as the loop will be used to hang dangles to beautify the earrings.

How to make earring hooks Step 2: curl the whole wire

Hold the bottom part of loop, and wrap the rest wire onto wrap&tap plier. Notice here the wrapping direction is opposite to the loop direction. After curling the wire, you will see the splits of loop and hook are in different way. Till the big hook shape made by wrap plier reaches wire, you can put down your plier. And use side cuter to give a flush cut? No, do not cut here!

How to make earring hooks Step 3: continue the hook work

First use round nose plier to make a slight curl on the other end of wire (just the reaching point);

Second use wire cutter to give a flush cut here.

Notice the curl has the opposite direction to loop too. The overall shape is like an arched gate.

How to make earring hooks Step 4: finish the earring hooks

Repeat your previous steps, and finish the other earring hook; now the pair of earring hooks is well done.

Earring hooks are not that complex, even for beginners, it’s an easily understood project about how to make earring hooks. Sincerely hope this instruction is helpful to you.

As for earring hooks, there are more patterns than you have tried. So just find and enjoy. 

Tag : jewelry making

PreviousHow to Make Green Resin Hoop Earrings

Search by Image

Search Nbeads with an image instead of text. Try dragging an image here.

  • Upload an image
  • Paste image URL

1. The image must be in one of the following formats: .jpg, .png, .jpeg, .bmp, .gif, .webp, .tiff, .ppm

2. The size of the image should be less than 5M!

3. The image length and width must be greater than or equal 200 pixels and smaller than or equal to 1024pixes.

1. The image must be in one of the following formats: .jpg, .png, .jpeg, .bmp, .gif, .webp, .tiff, .ppm

2. The size of the image should be less than 5M!

3. The image length and width must be greater than or equal 200 pixels and smaller than or equal to 1024pixes.

Uploading File